/live/media/SA/SA_SB8016_Fro.jpg)
TrakMotive SB-8016 CV Axle Shaft - Front Left or Front Right
| Brand | TrakMotive SB-8016 |
|---|---|
| Position | Front Left |
| Abs Tone Ring Included | No |
| Axle Nut Head Type | Hex |
| Axle Nut Height (in) | 4/5 |
| Axle Nut Height (mm) | 20 |
| Axle Nut Hex Size (in) | 1 1/4 |
| Axle Nut Hex Size (mm) | 31.8 |
| Axle Nut Included | Yes |
| Axle Nut Length (in) | 1 1/3 |
| Axle Nut Length (mm) | 34.4 |
| Axle Nut Locking Type | Stake |
| Axle Nut Thread Size | M22*1.5 |
| Boot Material | Neoprene |
| Inboard Joint Type | Female |
| Inboard Shaft Connection Style | Female |
| New Or Remanufactured | New |
| Number Of Inboard Splines | 25 |
| Number Of Outboard Splines | 27 |
| Outboard Joint Type | Conventional |
| Outboard Shaft Connection Style | Conventional |
| Overall Compressed Length (in) | 27.5 |
| Overall Compressed Length (mm) | 698.5 |
| Product line | CV Axle Shaft |
| Fits | Subaru |
New replacement shaft. Built as a new CV axle shaft for straightforward service.
Neoprene boot. Helps resist wear while keeping the joint protected.
Axle nut included. Conveniently supplied with a hex nut and stake lock.
Cross-references AMS Automotive 4135, AP Exhaust 7347 and ATE 607228 for the same application. See all 13.
TrakMotive SB-8016 CV Axle Shaft
TrakMotive SB-8016 is a new CV axle shaft built for driveline repair where smooth power transfer and proper axle fitment matter. It is a direct replacement style axle shaft for applications using a 25-spline inboard connection and 27-spline outboard connection, with a 27.5-inch compressed length.
Compatible With select Subaru Legacy and Subaru Outback applications, this CV axle shaft is built with a neoprene boot and a conventional outboard joint. The included axle nut uses an M22 x 1.5 thread, a 31.8 mm hex size, and a stake-style locking design.
Key Features
- Brand: TrakMotive CV Axle Shaft
- Part number: SB-8016
- New replacement axle shaft
- Female inboard shaft connection style
- Conventional outboard joint type
- 25 inboard splines and 27 outboard splines
- Neoprene boot material
- Overall compressed length: 27.5 in. (698.5 mm)
- Axle nut included with stake locking type
- ABS tone ring not included
Detailed Description
TrakMotive SB-8016 is a CV axle shaft for driveline service on select Subaru Legacy and Subaru Outback vehicles. The axle is configured with a female inboard connection, a conventional outboard joint, and the spline counts needed for the listed application. Its 27.5-inch compressed length and included axle nut help match the original axle layout during replacement. TrakMotive SB-8016 is a practical choice when replacing a worn or noisy axle on Subaru Legacy or Subaru Outback models that require this specific shaft configuration.
TrakMotive’s CV axle shaft line focuses on replacement driveline components for passenger vehicles, with this part built as a new unit rather than remanufactured. The manufacturer notes ISO 9001:1007 and TS 16949:2009 certification, supporting controlled production processes for CV axle applications.
This part cross-references Cardone Reman 60-7209 for the same application.
What It Helps Fix
- Clicking or popping during turns from a worn CV joint
- Vibration during acceleration caused by axle wear
- Grease leakage from a damaged axle boot
- Axle noise from spline or joint wear
- Driveline issues on Subaru Legacy and Subaru Outback applications
Installation Notes
Verify spline count, compressed length, axle nut thread size, and ABS requirements before installation. This axle uses a hex-style axle nut with M22 x 1.5 threads and a stake-type locking design. Confirm the vehicle’s original axle configuration matches the female inboard connection and conventional outboard joint before ordering. For Subaru Legacy and Subaru Outback fitment, compare the removed axle to the replacement part to confirm exact application details.
Quality Assurance
TrakMotive SB-8016 is a new CV axle shaft backed by a limited lifetime warranty. The manufacturer also states that ABS axles fit non-ABS applications unless otherwise noted, and that the company is ISO 9001:1007 and TS 16949:2009 certified.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||