/live/media/SA/SA_SB86026_Fro.jpg)
TrakMotive SB-86026 CV Axle Shaft - Front or Rear
| Brand | TrakMotive SB-86026 |
|---|---|
| Position | Front and Rear |
| ABS Ring Tooth Count | 0 |
| ABS Tone Ring Included | No |
| Axle Nut Head Type | Hex |
| Axle Nut Height (in) | .81 |
| Axle Nut Height (mm) | 20 |
| Axle Nut Hex Size (in) | 1.25 |
| Axle Nut Hex Size (mm) | 32 |
| Axle Nut Included | Yes |
| Axle Nut Length (in) | 1.44 |
| Axle Nut Length (mm) | 37 |
| Axle Nut Locking Type | Stake |
| Axle Nut Socket Size | 32 |
| Axle Nut Thread Size | M22x1.5 |
| Grade Type | Premium |
| Inboard Joint Boot Material | Thermoplastic |
| Inboard Joint Type | Male |
| Inboard Shaft Connection Style | Spline |
| Number Of Bolt Holes | 0 |
| Number Of Inboard Joint Bolt Holes | 0 |
| Number Of Inboard Shaft Bolts | 0 |
| Number Of Inboard Splines | 25 |
| Number Of Outboard Joint Bolt Holes | 0 |
| Number Of Outboard Shaft Bolts | 0 |
| Number Of Outboard Splines | 27 |
| Outboard Joint Boot Material | Thermoplastic |
| Outboard Joint Type | Conventional |
| Outboard Shaft Connection Style | Spline |
| Overall Compressed Length (in) | 32.69 |
| Overall Compressed Length (mm) | 831 |
| Overall Extended Length (in) | 34.69 |
| Product line | AAR CV Axle Shaft |
| Fits | Subaru · 8 vehicles |
OE-style replacement. AAR CV axle shaft for straightforward service fit.
Premium grade. Built with thermoplastic boots and conventional joints.
ABS-ready design. Configured for non-ABS applications unless otherwise noted.
Cross-references TrakMotive SB-86026 for the same application. See all 1.
TrakMotive SB-86026 CV Axle Shaft
The TrakMotive AAR CV Axle Shaft SB-86026 is a premium driveline replacement for select Subaru applications. It is built for front or rear service depending on vehicle fitment, with OE-style spline connections and thermoplastic boots for the inboard and outboard joints.
This Subaru Legacy and Subaru Outback axle shaft is engineered for direct replacement use where the original AAR CV axle design is specified. TrakMotive SB-86026 is backed by ISO 9001:2008 and TS 16949:2009 certified manufacturing standards and includes an axle nut with M22x1.5 thread size, 32 mm hex, and stake locking type.
Key Features
- Premium-grade CV axle shaft for driveline repair
- AAR CV Axle Shaft product line for OE-style replacement applications
- Fits 2020-2024 Subaru Legacy, front
- Fits 2020-2022 Subaru Outback, rear
- 25-spline inboard and 27-spline outboard shaft connection
- Conventional outboard joint design with thermoplastic boot material
- Includes axle nut with 32 mm socket size and M22x1.5 thread
- No ABS tone ring included; ABS ring tooth count is 0
Product Details
The TrakMotive SB-86026 is part of the AAR CV Axle Shaft line, built for Subaru Legacy and Subaru Outback driveline service where the OE AAR design is required. It uses spline-style shaft connections, a male inboard joint, and a conventional outboard joint layout to match the original axle architecture. Overall compressed length is 32.69 inches, and overall extended length is 34.69 inches, helping confirm proper application during replacement.
For fitment-based searches, this part is a direct option for a 2020-2024 Subaru Legacy front CV axle shaft and a 2020-2022 Subaru Outback rear CV axle shaft. The SB-86026 part number is the same interchange reference used for this application.
Common Repair Uses
- Restores a worn or noisy CV axle assembly
- Addresses clicking or vibration during acceleration and turning
- Replaces damaged axle splines or joint boots
- Corrects driveline play caused by internal CV joint wear
- Supports OE-style replacement on Subaru Legacy and Subaru Outback models
Installation Notes
Verify axle length, spline count, and position before installation. This axle includes an axle nut, but the vehicle should still be checked for correct torque procedure, hub condition, and seal surface wear. Because ABS tone ring is not included and ABS ring tooth count is 0, confirm the vehicle’s original axle configuration before ordering. Use the listed fitment to match the correct Subaru Legacy or Subaru Outback application.
Quality Assurance
TrakMotive manufactures this axle under ISO 9001:2008 and TS 16949:2009 certified quality systems. The SB-86026 also carries a limited lifetime warranty from the manufacturer.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2024 | Subaru | Legacy | — | — | Front | Wagon; AAR CV Axle Shaft |
| 2023 | Subaru | Legacy | 2.4L | H4 | Front | Wagon; AAR CV Axle Shaft |
| 2022 | Subaru | Legacy | 2.4L | H4 | Front | Wagon; AAR CV Axle Shaft |
| 2022 | Subaru | Outback | 2.4L | H4 | Rear | OE AAR design; AAR CV Axle Shaft |
| 2021 | Subaru | Legacy | 2.4L | H4 | Front | Wagon; AAR CV Axle Shaft |
| 2021 | Subaru | Outback | 2.4L | H4 | Rear | OE AAR design; AAR CV Axle Shaft |
| 2020 | Subaru | Legacy | 2.4L | H4 | Front | Wagon; AAR CV Axle Shaft |
| 2020 | Subaru | Outback | 2.4L | H4 | Rear | OE AAR design; AAR CV Axle Shaft |
| No rows match your filter. | ||||||