/live/media/SA/SA_SK8043_Fro.jpg)
TrakMotive SK-8043 CV Axle Shaft - Front Left
| Brand | TrakMotive SK-8043 |
|---|---|
| Position | Front Left |
| Abs Ring Tooth Count | 42 |
| Abs Ring Type | Toothed |
| Abs Tone Ring Included | Yes |
| Axle Nut Head Type | Hex |
| Axle Nut Height (in) | 3/4 |
| Axle Nut Height (mm) | 19 |
| Axle Nut Hex Size (in) | 1 1/6 |
| Axle Nut Hex Size (mm) | 30 |
| Axle Nut Included | Yes |
| Axle Nut Length (in) | 1 1/3 |
| Axle Nut Length (mm) | 34.6 |
| Axle Nut Locking Type | Standard |
| Axle Nut Thread Size | M18*1.5 |
| Boot Material | Neoprene |
| Inboard Joint Type | Male |
| Inboard Shaft Connection Style | Male |
| New Or Remanufactured | New |
| Number Of Inboard Splines | 22 |
| Number Of Outboard Splines | 25 |
| Outboard Joint Type | Conventional |
| Outboard Shaft Connection Style | Conventional |
| Overall Compressed Length (in) | 23.31 |
| Overall Compressed Length (mm) | 592 |
| Product line | CV Axle Shaft |
| Fits | Suzuki |
New axle shaft. Fresh replacement part with a neoprene boot for dependable sealing.
ABS tone ring included. Built with a 42-tooth toothed ring for accurate wheel speed signal transfer.
Axle nut included. Comes with a standard M18 x 1.5 nut for a complete install.
Cross-references Anchor 8901, Cardone Reman 60-7291 and Cardone Reman 60-7292 for the same application. See all 14.
CV Axle Shaft for Driveline Repair
TrakMotive SK-8043 is a new CV axle shaft built for driveline service where a direct-fit replacement is needed. This CV axle shaft includes a toothed ABS tone ring with 42 teeth, a neoprene boot, and the axle nut required for installation. It is engineered for applications using a 22-spline inboard male connection and a 25-spline conventional outboard connection.
Compatible With select Hyundai and Kia applications, this TrakMotive CV axle shaft supports common front-wheel-drive driveline repair needs. The SK-8043 part number is also referenced in aftermarket interchange listings for cross-checking during parts lookup.
Key Features
- TrakMotive CV axle shaft, part number SK-8043
- New replacement axle for driveline and CV component service
- 42-tooth toothed ABS ring included
- Neoprene boot material for CV joint protection
- Male inboard shaft connection with 22 splines
- Conventional outboard shaft connection with 25 splines
- Axle nut included, M18 x 1.5 thread
- Overall compressed length: 23.31 in. (592 mm)
Detailed Description
TrakMotive SK-8043 is a CV axle shaft designed for direct replacement in select Hyundai and Kia driveline applications. It uses a male inboard joint and a conventional outboard joint, with an overall compressed length of 23.31 inches to match the required axle geometry. The included toothed ABS tone ring and 42-ring tooth count support vehicles that use wheel speed sensing at the axle. The SK-8043 part number is a useful reference when verifying driveline and axle shaft interchange data.
TrakMotive’s CV axle shaft line focuses on replacement components for passenger vehicle driveline repair, and this axle follows that product-line approach with application-specific spline counts, ABS ring configuration, and axle nut specifications. It is a practical choice for Hyundai Elantra, Kia Forte, and related model searches where the correct axle shaft dimensions and connection styles matter.
Common Problems This Part Can Address
- Clicking or popping noises during turns from worn CV joints
- Vibration or shudder during acceleration from a damaged axle shaft
- Grease leakage from a torn or deteriorated CV boot
- ABS warning concerns related to a damaged tone ring assembly
- Excessive drivetrain play from worn axle splines or joints
Installation Notes and Tips
Verify spline count, compressed length, ABS ring style, and axle nut thread size before installation. Confirm the vehicle uses the correct inboard and outboard connection styles, especially when comparing Hyundai and Kia axle shaft listings. Replace the axle nut during service only if the application calls for it and torque fasteners to the vehicle manufacturer’s specification.
Because ABS axles can fit non-ABS applications unless otherwise noted, confirm sensor and tone ring requirements before ordering. Use the SK-8043 part number during catalog lookup to match the correct CV axle shaft to the vehicle.
Quality Assurance
TrakMotive manufactures this axle shaft as a new part and identifies the product line as ISO 9001:1007 and TS 16949:2009 certified. The SK-8043 CV axle shaft is backed by a limited lifetime warranty.
This part cross-references Cardone Reman 60-7291 and 60-7292 for the same application.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||