/live/media/SA/SA_VO86004_Fro.jpg)
TrakMotive VO-86004 CV Axle Shaft - Front Right
| Brand | TrakMotive VO-86004 |
|---|---|
| Position | Front Right |
| ABS Ring Tooth Count | 0 |
| ABS Tone Ring Included | No |
| Axle Bolt Hex Size (mm) | 13 |
| Axle Bolt Length (mm) | 74 |
| Axle Bolt Thread Size | M10x1.5 |
| Axle Nut Included | No |
| Grade Type | Premium |
| Inboard Joint Boot Material | Thermoplastic |
| Inboard Joint Type | Long-male |
| Inboard Shaft Connection Style | Spline |
| Number Of Bolt Holes | 1 |
| Number Of Inboard Joint Bolt Holes | 0 |
| Number Of Inboard Shaft Bolts | 0 |
| Number Of Inboard Splines | 28 |
| Number Of Outboard Joint Bolt Holes | 1 |
| Number Of Outboard Shaft Bolts | 1 |
| Number Of Outboard Splines | 40 |
| Outboard Joint Boot Material | Thermoplastic |
| Outboard Joint Type | Audi style spline bolt |
| Outboard Shaft Connection Style | Spline |
| Overall Compressed Length (in) | 39.06 |
| Overall Compressed Length (mm) | 992 |
| Overall Extended Length (in) | 41.125 |
| Overall Extended Length (mm) | 1045 |
| Product line | AAR CV Axle Shaft |
| Fits | Volvo · 2 vehicles |
OE-style replacement. AAR CV axle shaft for a straightforward driveline repair.
Thermoplastic boots. Durable boot material helps protect the joints from wear.
Premium grade. Built as a certified TrakMotive component.
Cross-references TrakMotive VO-86004 and NCV73080 for the same application. See all 2.
Volvo S60 Front Right CV Axle Shaft
TrakMotive VO-86004 is a premium CV axle shaft for the front right position on 2013-2014 Volvo S60 models. It is built to match the OE AAR design for this application and is engineered for direct driveline replacement on the specified vehicle fitment.
The TrakMotive AAR CV Axle Shaft line focuses on application-specific construction for import driveline service. VO-86004 follows the OE-style AAR layout used on the Volvo S60 front right position, with thermoplastic boots, spline connections, and the correct axle geometry for the listed fitment.
- Fits 2013-2014 Volvo S60, front right
- Part number: VO-86004
- OE AAR design for the listed application
- Premium-grade CV axle shaft
- Inboard joint type: long-male
- Inboard spline count: 28
- Outboard joint type: Audi-style spline bolt
- Outboard spline count: 40
- Thermoplastic boot material at both joints
- ABS tone ring not included; ABS ring tooth count: 0
This CV axle shaft is used to restore front-wheel driveline function on the Volvo S60 when the original axle is worn, noisy, or has excessive play. VO-86004 also cross-references NCV73080 for the same application.
Common Problems This Part Can Address
- Clicking or popping during turns from a worn outer CV joint
- Vibration under acceleration caused by axle imbalance or joint wear
- Grease leakage from damaged CV boots
- Clunking or looseness in the front driveline
- Loss of smooth power transfer to the front right wheel
Installation Notes
Verify axle length, spline count, and bolt style before installation. This axle uses a 13 mm axle bolt hex size, M10x1.5 thread, and does not include an axle nut. Confirm the vehicle is a non-ABS application unless otherwise noted by the vehicle configuration. Always inspect related seals, hub components, and suspension hardware during replacement.
Quality Assurance
TrakMotive manufactures this AAR CV axle shaft as an ISO 9001:2008 and TS 16949:2009 certified product line. VO-86004 is backed by a limited lifetime warranty.
| Year | Make | Model | Drive Type | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|---|
| 2014 | Volvo | S60 | AWD | 2.5L | L5 | Front Right | OE AAR design; AAR CV Axle Shaft |
| 2013 | Volvo | S60 | AWD | 2.5L | L5 | Front Right | OE AAR design; AAR CV Axle Shaft |
| No rows match your filter. | |||||||