Vemo V95-72-0126 Manifold Absolute Pressure Sensor

Manifold Absolute Pressure Sensor for Volvo Applications

The Vemo V95-72-0126 is a manifold absolute pressure sensor built for Volvo emissions and engine management applications. It is an OE-reference aftermarket replacement for vehicles using OE part number 31372487, with compact dimensions of 29 mm high, 36 mm long, and 37 mm wide.

VEMO product line components are developed for direct-fit replacement needs in emission control and sensor applications, making this MAP sensor a practical choice for restoring accurate intake manifold pressure signal input on supported Volvo models.

• Manifold absolute pressure sensor for emission control and engine management systems
• OE-reference replacement for Volvo applications using OE No. 31372487
• Compact sensor body: 29 mm height, 36 mm length, 37 mm width
• Lightweight design at 0.005 kg
• Aftermarket VEMO part number V95-72-0126

Detailed Product Information

The Vemo V95-72-0126 manifold absolute pressure sensor is used to measure intake manifold pressure and send that data to the engine control system. Accurate MAP sensor input is important for fuel delivery, load calculation, and overall drivability on Volvo S60, V60, XC60, XC90, and related models. This part number V95-72-0126 cross-references OE No. 31372487 for the same application.

Compatible With 2015-2020 Volvo S60, N/A; 2015-2020 Volvo V60, N/A; 2019-2020 Volvo XC40, N/A; 2015-2020 Volvo XC60, N/A; 2016-2020 Volvo XC90, N/A; 2017-2019 Volvo S90, N/A; 2018-2019 Volvo V90, N/A; 2018-2019 Volvo V90 Cross Country, N/A; 2017-2018 Volvo S60 Cross Country, N/A; 2017-2018 Volvo V60 Cross Country, N/A; 2015-2016 Volvo S80, N/A; and 2015-2016 Volvo XC70, N/A.

Common Issues This Sensor Can Address

• Incorrect manifold pressure readings in the engine control system
• Rough idle or unstable engine operation related to sensor signal errors
• Reduced throttle response caused by inaccurate load data
• Check engine light conditions tied to MAP sensor faults
• Fuel mixture and drivability problems on supported Volvo models

Installation Notes and Tips

Verify OE number 31372487 and confirm the connector and mounting style match the original sensor before installation. Inspect the intake tract and electrical connector for contamination, corrosion, or damage that could affect sensor readings. After installation, clear diagnostic trouble codes and confirm live data readings during engine operation.

Quality Assurance

This VEMO aftermarket sensor is cataloged as an OE-reference replacement for the listed Volvo applications. Fitment is confirmed for the supported model years and should be matched to the vehicle’s original part number before ordering.