Wagner Brake BD126192E Disc Brake Rotor - Front

Wagner Brake BD126192E Front Rotor Overview

The Wagner Brake BD126192E is a front disc brake rotor built for vehicles that use a 292 mm vented rotor. It features a full cast construction, cast iron material, a smooth surface, and a directional disc finish for consistent braking performance and straightforward service replacement.

With a rust-resistant coating on the non-braking surface, this rotor is engineered to help reduce corrosion where the rotor is exposed to the elements. It is a direct-fit option for select Subaru, Toyota, and Scion front brake applications, including Subaru BRZ, Subaru Forester, Toyota GR86, and Scion FR-S.

Key Features

• Part number BD126192E front disc brake rotor
• Vented rotor design for front axle applications
• Full cast construction with cast iron material
• Rust-resistant coating on the non-braking surface
• Smooth braking surface with directional disc finish
• Nominal thickness: 24.0 mm (0.945 in)
• Outside diameter: 293.1 mm (11.540 in)
• Height: 56.7 mm (2.234 in)

Detailed Description

The Wagner Brake BD126192E is built for front brake service on select Subaru, Toyota, and Scion models that use a 292 mm diameter rotor. Its vented, full cast design supports heat management during repeated stops, while the smooth braking surface helps maintain even pad contact. The directional finish and corrosion-resistant coating add practical value for daily driving and seasonal exposure.

This rotor cross-references Centric Parts 120.47021 and 121.47021 for the same application. It also aligns with OE-style replacement needs for vehicles such as the Subaru BRZ, Subaru Forester, Toyota 86, and Toyota GR86. If you are replacing worn front rotors on a Subaru BRZ front brake setup or a Toyota GR86 front rotor application, BD126192E provides the specified dimensions and construction for the listed fitments.

Vehicle Fitment

• Fits 2022-2026 Toyota GR86, front
• Fits 2017-2020 Toyota 86, front; 5 stud wheel; with 292 mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2017-2018 Subaru BRZ, front; without Brembo Brake System; 5 stud wheel; with 292 mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2009-2018 Subaru Forester, front; 5 stud wheel; with 292 mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2016-2017 Subaru Crosstrek, front; 5 stud wheel; with 292 mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2013-2016 Scion FR-S, front; 5 stud wheel; with 292 mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2016 Subaru BRZ, front; with vented rear rotors; 5 stud wheel; with 292 mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2013-2015 Subaru BRZ, front; 5 stud wheel; with 292 mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2013-2015 Subaru XV Crosstrek, front; 5 stud wheel; with 292 mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2006-2014 Subaru Impreza, front; 5 stud wheel; with 292 mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2006-2014 Subaru Legacy, front; 5 stud wheel; with 292 mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2005-2014 Subaru Outback, front; 5 stud wheel; with 292 mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2012-2014 Subaru WRX, front; 5 stud wheel; with 292 mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2004-2005 Subaru Baja, front; 5 stud wheel; with 292 mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion

Common Problems This Rotor Can Address

• Front rotor wear that causes reduced braking consistency
• Brake pulsation related to rotor surface condition
• Corrosion on exposed rotor areas
• Noise from uneven rotor and pad contact
• Replacement needs for 292 mm vented front brake setups

Installation Notes and Tips

Confirm rotor diameter, vented construction, and front position before installation. This part is specified for vehicles with a 292 mm front rotor and 5 stud wheel applications in the listed fitments. For proper braking performance, pair the rotor with matching brake pads and inspect calipers, pad hardware, and hub surfaces during service.

Use the vehicle notes carefully, especially on Subaru BRZ applications that specify without Brembo Brake System or with vented rear rotors. The BD126192E part number should be matched to the exact brake configuration before installation.

Quality Assurance

Wagner Brake premium rotors are engineered with a focus on performance, corrosion resistance, and ease of installation. The BD126192E follows that approach with a cast iron, vented design and protective coating for exposed surfaces.