Wagner Brake BD126456E Disc Brake Rotor - Front

Wagner Brake BD126456E Front Rotor Overview

The Wagner Brake BD126456E is a premium front disc brake rotor built for select Honda and Acura applications, including the Honda CR-V, Honda Crosstour, Acura RDX, and Honda Accord Crosstour. It uses a vented, full cast construction with a smooth directional finish and rust-resistant coating to support consistent braking performance and easier installation.

Key Features

• Part number: BD126456E
• Front disc brake rotor for select 2007-2016 Honda CR-V, 2012-2015 Honda Crosstour, 2007-2012 Acura RDX, and 2010-2011 Honda Accord Crosstour applications
• Vented rotor design for front brake use
• Full cast construction in cast iron
• Rust resistant coating on non-braking surfaces
• Smooth, directional disc finish
• Outside diameter: 296.0 mm / 11.654 in
• Nominal thickness: 28.0 mm / 1.102 in
• Height: 47.4 mm / 1.866 in

Detailed Description

Wagner Brake BD126456E is engineered as a direct-fit front rotor for vehicles that require a 296 mm diameter vented disc. The cast iron, full cast design helps provide stable braking characteristics, while the directional surface finish supports even pad contact during service. The rust-resistant coating helps protect non-braking surfaces from corrosion, which is especially relevant for daily-driven Honda CR-V and Acura RDX front brake rotor replacement jobs. Pairing the BD126456E with Wagner brake pads follows the brand’s recommended system-matching approach for consistent brake service results. This part cross-references Raybestos Brakes 980515 for the same application.

Vehicle Fitment

• Fits 2007-2016 Honda CR-V, front; 5 stud wheel, with 296mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2012-2015 Honda Crosstour, front; 5 stud wheel, with 296mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2007-2012 Acura RDX, front; 5 stud wheel, with 296mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion
• Fits 2010-2011 Honda Accord Crosstour, front; 5 stud wheel, with 296mm diameter rotor; black E-Coat on non-braking surface to prevent rust and corrosion

What This Rotor Helps Address

• Front brake pulsation caused by worn or uneven rotor surfaces
• Corrosion on exposed rotor areas from road moisture and salt
• Reduced braking consistency from rotor wear beyond service limits
• Noise or vibration related to rotor surface condition
• Brake service needs on Honda CR-V, Honda Crosstour, Acura RDX, and Honda Accord Crosstour front axles

Installation Notes and Tips

Verify rotor diameter, thickness, and height against the vehicle’s original specifications before installation. Clean the hub mounting surface thoroughly to help prevent lateral runout, and inspect pads, calipers, and hardware condition during brake service. For best results, install on the front axle only where the listed fitment applies and follow the vehicle manufacturer’s torque and bedding procedures.

Quality Assurance

Wagner Brake premium rotors are built with corrosion resistance and installation ease in mind, and the BD126456E follows that product approach with a rust-resistant coating and directional finish. For a matched brake service, Wagner recommends pairing this rotor with Wagner brake pads.