/live/media/WB/WB_BD126487E_Fro.jpg)
Wagner Brake BD126487E Disc Brake Rotor - Front
| Brand | Wagner Brake BD126487E |
|---|---|
| Position | Front |
| Nominal Thickness | 26.0 |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Surface Type | Smooth |
| Solid Or Vented Type Rotor | Vented |
| Disc Finish | Directional |
| Height | 1.949 |
| Height | 49.5 |
| Material | Cast iron |
| Nominal Thickness | 1.024 |
| Outside Diameter | 11.646 |
| Outside Diameter | 295.8 |
| Fits | Nissan · 7 vehicles |
Premium brake rotor. Engineered for strong performance, corrosion resistance, and easy installation.
Rust-resistant coating. Helps protect the rotor from corrosion over time.
Vented design. Promotes better airflow for more consistent braking performance.
Cross-references Centric Parts 120.42096, Centric Parts 121.42096 and Raybestos Brakes 980562 for the same application. See all 8.
Front Brake Rotor for Nissan Altima
The Wagner Brake BD126487E is a front disc brake rotor engineered for 2007-2013 Nissan Altima applications with a 296mm diameter rotor and 5-stud wheel setup. Built from full cast iron with a vented, smooth surface and directional disc finish, it supports consistent braking performance while the rust-resistant coating helps protect non-braking surfaces from corrosion.
Key Features
- Fits 2007-2013 Nissan Altima, front
- 296mm outside diameter for the confirmed application
- Vented rotor design for front brake use
- Full cast construction in cast iron
- Rust resistant coating on non-braking surfaces
- Smooth braking surface with directional finish
- OE-style replacement part number BD126487E
Detailed Product Overview
Wagner Brake BD126487E is a premium replacement rotor built for the front axle of the Nissan Altima from 2007 through 2013. The rotor’s 26.0 mm nominal thickness, 49.5 mm height, and 295.8 mm outside diameter match the listed fitment requirements, while the vented construction helps manage heat during repeated stops. Wagner pairs corrosion resistance with an easy-to-install design, making this rotor a practical choice for drivers replacing worn or warped front rotors on a Nissan Altima. This part cross-references Centric Parts (e.g., 120.42096, 121.42096) for the same application.
Common Problems This Rotor Can Address
- Brake pulsation caused by rotor wear or thickness variation
- Visible rotor rust on exposed surfaces
- Reduced braking smoothness from scored or uneven rotors
- Noise related to worn front brake components
- Service replacement for a damaged or out-of-spec front rotor
Installation Notes and Tips
Verify the vehicle uses a 5-stud wheel and the 296mm front rotor specification before installation. Clean the hub mounting surface thoroughly to help prevent rotor runout, and inspect pads, calipers, and hardware condition at the same time. For balanced braking performance, Wagner recommends pairing this rotor with Wagner brake pads.
Quality Assurance
Wagner Brake engineers its premium rotors with a focus on performance, corrosion resistance, and straightforward installation. The BD126487E is built to meet the needs of the listed Nissan Altima front brake application and is backed by Wagner’s product engineering standards.
| Year | Make | Model | Body Type | Position | Notes |
|---|---|---|---|---|---|
| 2013 | Nissan | Altima | Coupe | Front | 5 Stud Wheel, with 296mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2012 | Nissan | Altima | — | Front | 5 Stud Wheel, with 296mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2011 | Nissan | Altima | — | Front | 5 Stud Wheel, with 296mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2010 | Nissan | Altima | — | Front | 5 Stud Wheel, with 296mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2009 | Nissan | Altima | — | Front | 5 Stud Wheel, with 296mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2008 | Nissan | Altima | — | Front | 5 Stud Wheel, with 296mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2007 | Nissan | Altima | — | Front | 5 Stud Wheel, with 296mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| No rows match your filter. | |||||