/live/media/WB/WB_BD126495E_Fro.jpg)
Wagner Brake BD126495E Disc Brake Rotor - Rear
| Brand | Wagner Brake BD126495E |
|---|---|
| Position | Rear |
| Nominal Thickness | 17.9 |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Surface Type | Smooth |
| Solid Or Vented Type Rotor | Vented |
| Disc Finish | Directional |
| Height | 2.658 |
| Height | 67.5 |
| Material | Cast iron |
| Nominal Thickness | 0.708 |
| Outside Diameter | 12.597 |
| Outside Diameter | 319.9 |
| Fits | Subaru · 11 vehicles |
Premium brake rotor. Engineered for maximum performance, corrosion resistance, and easy installation.
Rust-resistant coating. Helps protect the rotor from corrosion over time.
Vented design. Promotes efficient airflow for consistent braking performance.
Cross-references Centric Parts 120.47028, Centric Parts 120.47029 and Centric Parts 121.47028 for the same application. See all 9.
Wagner Brake BD126495E Rear Rotor Overview
The Wagner Brake BD126495E is a rear disc brake rotor built for select Subaru applications, including the Tribeca, WRX, Legacy, and B9 Tribeca. It uses a full cast construction with a smooth, vented design and a rust-resistant coating to support consistent braking performance and easier installation.
Key Features
- Full cast iron construction for dependable rotor strength
- Vented rotor design for rear brake heat management
- Smooth surface type for even pad contact
- Rust-resistant coating on non-braking surfaces
- Directional disc finish
- Outside diameter: 319.9 mm / 12.597 in
- Nominal thickness: 17.9 mm / 0.708 in
- Height: 67.5 mm / 2.658 in
Detailed Description
Wagner Brake BD126495E is engineered as a rear replacement rotor for Subaru vehicles that use a 320 mm diameter rear brake setup. The cast iron, vented rotor construction supports stable braking under repeated stops, while the rust-resistant coating helps protect non-friction surfaces from corrosion. For drivers searching for a rear brake rotor for 2010-2014 Subaru Tribeca, 2012-2014 Subaru WRX, 2011 Subaru Legacy, or 2006-2007 Subaru B9 Tribeca, this rotor matches the listed fitment and dimensions. Pairing the Wagner Brake BD126495E with Wagner brake pads supports a matched brake service approach.
This part cross-references Centric Parts 120.47028 and Raybestos Brakes 980378 for the same application.
What It Helps Address
- Rear brake pulsation from worn or uneven rotors
- Brake noise caused by rotor surface wear
- Corrosion on exposed rotor surfaces
- Reduced braking consistency from heat-related rotor wear
- Fitment issues on Subaru rear brake service with 320 mm rotor applications
Installation Notes and Tips
Confirm rear fitment by matching the vehicle year, model, and 5-stud wheel configuration to the listed applications before installation. Verify rotor diameter, thickness, and height against the existing part, especially on Subaru Tribeca, WRX, Legacy, and B9 Tribeca rear brake systems. Clean the non-braking coated surfaces before installation and follow proper brake service procedures when replacing pads and rotors together.
Quality Assurance
Wagner Brake premium rotors are built with a focus on performance, corrosion resistance, and straightforward installation. The BD126495E is manufactured to support consistent fit and finish for the listed Subaru rear brake applications.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2014 | Subaru | Tribeca | Rear | 5 Stud Wheel, with 320mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2014 | Subaru | WRX | Rear | 5 Stud Wheel, with 320mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2013 | Subaru | Tribeca | Rear | 5 Stud Wheel, with 320mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2013 | Subaru | WRX | Rear | 5 Stud Wheel, with 320mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2012 | Subaru | Tribeca | Rear | 5 Stud Wheel, with 320mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2012 | Subaru | WRX | Rear | 5 Stud Wheel, with 320mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2011 | Subaru | Legacy | Rear | 5 Stud Wheel, with 320mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2011 | Subaru | Tribeca | Rear | 5 Stud Wheel, with 320mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2010 | Subaru | Tribeca | Rear | 5 Stud Wheel, with 320mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2007 | Subaru | B9 Tribeca | Rear | 5 Stud Wheel, with 320mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| 2006 | Subaru | B9 Tribeca | Rear | 5 Stud Wheel, with 320mm Diameter Rotor; Black E-Coat on non-braking surface to prevent rust and corrosion |
| No rows match your filter. | ||||