/live/media/WB/WB_BD181331E_Fro.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Wagner Brake BD181331E Disc Brake Rotor - Front
| Brand | Wagner Brake BD181331E |
|---|---|
| Position | Front |
| Material | Cast iron |
| Discard Thickness | 1.154 |
| Discard Thickness | 29.400 |
| Nominal Thickness | 1.263 |
| Nominal Thickness | 32.140 |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Outside Diameter | 12.987 |
| Outside Diameter | 329.880 |
| ABS Tone Ring Included | No |
| Surface Type | Smooth |
| Solid Or Vented Type Rotor | Vented |
| Bearings Included | No |
| Center Hole Diameter | 2.637 |
| Center Hole Diameter | 67.000 |
| Stud/Lug Hole Quantity | 5 |
| Directional or Non-Directional Brake Surface | Directional |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Part Description | Disc brake rotor |
| Fits | Mercedes-Benz · 11 vehicles |
OE-style replacement. Engineered for direct rotor service with a conventional fit and finish.
Vented cast iron. Helps manage heat while maintaining a smooth braking surface.
Rust-resistant coating. Adds surface protection for cleaner long-term appearance.
Cross-references Dynamic Friction Company 600-63144, Dynamic Friction Company 604-63144 and Dynamic Friction Company 900-63144 for the same application. See all 12.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Premium front brake rotor for Mercedes-Benz
Wagner Brake BD181331E is a vented disc brake rotor built for front brake service on select Mercedes-Benz SUVs. It combines cast iron construction with a rust-resistant coating and a smooth, directional braking surface for consistent rotor performance.
Key features
- Cast iron, full-cast rotor construction
- Vented design for improved heat management
- Rust-resistant coating helps protect the rotor surface
- Smooth, directional braking surface
- Conventional rotor design with a 5-lug pattern
Detailed fitment and design
Compatible with 2012-2015 Mercedes-Benz ML350, front; 2015 Mercedes-Benz ML250, front; 2016 Mercedes-Benz GLE350d, front; 2016-2017 Mercedes-Benz GLE300d, front; and 2016-2018 Mercedes-Benz GLE350, front. The BD181331E uses a 329.880 mm outside diameter, 32.140 mm nominal thickness, and 29.400 mm discard thickness to match the specified application. Wagner Brake BD181331E is engineered for maximum performance, corrosion resistance, and easier installation, and it pairs well with Wagner brake pads for balanced braking system service. This part cross-references Dynamic Friction Company (e.g., 600-63144, 604-63144) for the same application.
What this rotor helps address
- Brake pulsation caused by worn rotor surfaces
- Reduced braking consistency from heat-affected rotors
- Surface corrosion on exposed brake components
- Rotor replacement needs during brake service
Installation notes and quality assurance
Verify rotor dimensions, hub fit, and front axle application before installation. Clean the hub mounting surface and inspect pads, calipers, and hardware condition during service. For best results, install with matching Wagner brake pads and follow the vehicle service procedure for bedding-in the new rotor.
Wagner Brake premium rotors are engineered with a focus on performance, corrosion resistance, and installation ease.
Fits 2012-2018 Mercedes-Benz GLE/ML front applications as listed above.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| 2018 | Mercedes-Benz | GLE350 | Front | — |
| 2017 | Mercedes-Benz | GLE300d | Front | — |
| 2017 | Mercedes-Benz | GLE350 | Front | — |
| 2016 | Mercedes-Benz | GLE300d | Front | — |
| 2016 | Mercedes-Benz | GLE350 | Front | — |
| 2016 | Mercedes-Benz | GLE350d | Front | — |
| 2015 | Mercedes-Benz | ML250 | Front | — |
| 2015 | Mercedes-Benz | ML350 | Front | — |
| 2014 | Mercedes-Benz | ML350 | Front | — |
| 2013 | Mercedes-Benz | ML350 | Front | — |
| 2012 | Mercedes-Benz | ML350 | Front | — |
| No rows match your filter. | ||||