/live/media/WK/WK_18587_Fro.jpg)
Walker 18587 Exhaust Muffler
| Brand | Walker 18587 |
|---|---|
| Universal Or Specific Fit | Specific |
| Shape | Round |
| Grade Type | Regular |
| Inlet Inside Diameter | 2 |
| Body Width | 7 |
| Inlet Quantity | 1 |
| Outlet Quantity | 1 |
| Reversible | No |
| Tunable | No |
| Overall Length | 61.375 |
| Body Height | 7 |
| Body Length | 21 |
| Body Material | Steel |
| Finish | Aluminized |
| Inlet 1 Inside Diameter | 2 |
| Inlet 1 Type | Pipe connection |
| Inlet Configuration | Offset |
| Inlet Offset | 1.75 |
| Inlet Type | Pipe connection |
| Muffler Type | Combination |
| Outlet 1 Outside Diameter | 2.25 |
| Outlet 1 Type | Tip |
| Outlet Configuration | Offset |
| Outlet Outside Diameter | 2.25 |
| Outlet Type | Tip |
| Product line | SoundFX Direct Fit |
| Fits | Toyota · 11 vehicles |
Direct-fit replacement. Installs as a specific-fit muffler with no modifications needed.
Aluminized steel. Helps resist corrosion for longer service life than low-carbon steel.
Mechanical interior joints. Spun-locked heads add durability and a quality appearance.
Cross-references BRExhaust 295-177, BRExhaust 295-179 and Gates 52452 for the same application. See all 7.
Walker SoundFX Direct Fit Muffler for Tacoma
Walker SoundFX Direct Fit muffler Part Number 18587 is a specific-fit exhaust muffler for select Toyota Tacoma applications. It combines a round steel body with an aluminized finish to help extend service life while maintaining a clean OE-style appearance and controlled exhaust acoustics.
Built for 1995-2004 Toyota Tacoma models, this Walker SoundFX muffler is a direct-fit replacement for vehicles with the listed emission-system configurations. The 18587 part number is a practical choice when replacing a worn or damaged Tacoma muffler and restoring proper exhaust routing.
Key Features
- Specific-fit exhaust muffler for select Toyota Tacoma models
- 100% aluminized steel construction for improved corrosion resistance versus low-carbon steel
- Round, combination muffler design with a 2-inch inlet and 2.25-inch outlet
- Offset inlet and offset outlet configuration for application-specific fitment
- Mechanical interior joints and spun-locked heads for added durability
- Direct-fit SoundFX line for quality appearance and controlled exhaust tone
Product Details
The Walker SoundFX Direct Fit line is built for drivers who want a replacement muffler that matches the vehicle’s original exhaust layout without unnecessary modification. This muffler uses aluminized steel body material and a regular-grade construction to balance durability and fitment accuracy. The 61.375-inch overall length, 21-inch body length, and 7-inch body dimensions reflect the application-specific design used on compatible Toyota Tacoma exhaust systems.
Part Number 18587 cross-references Walker Exhaust 53399 for the same application. It is also listed with interchange references including Gates 52452 and TYC 700313. For Tacoma owners searching for a Toyota Tacoma muffler replacement, this direct-fit unit supports a straightforward exhaust repair on the specified 1995-2004 vehicles.
Common Problems This Part Can Address
- Rust or corrosion in the original muffler body
- Exhaust noise caused by a failing internal muffler structure
- Damaged or leaking muffler seams
- Poor exhaust tone after the factory muffler wears out
- Fitment issues when replacing a welded Tacoma exhaust assembly
Installation Notes
Compatible With 1995 Toyota Tacoma, N/A, with Federal Emission System; if the exhaust is a welded assembly, replace all required parts. Compatible With 1996-1999 Toyota Tacoma, N/A; if the exhaust is a welded assembly, replace all required parts. Compatible With 2000 Toyota Tacoma, N/A, with Federal Emission System; if the exhaust is a welded assembly, replace all required parts. Compatible With 2000 Toyota Tacoma, N/A, with California Emission System; if the exhaust is a welded assembly, replace all required parts. Compatible With 2001-2004 Toyota Tacoma, N/A; if the exhaust is a welded assembly, replace all required parts.
Verify inlet and outlet orientation before installation. Because this muffler is not reversible or tunable, it should be matched to the vehicle’s exhaust routing and emission configuration before final fitment.
Quality Assurance
Walker SoundFX mufflers are built with aluminized steel, mechanical interior joints, and spun-locked heads to support long-term durability in exhaust service. The direct-fit design is intended to provide a clean replacement solution for the specified Toyota Tacoma applications.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2004 | Toyota | Tacoma | 2.7L | L4 | N/A | If welded assembly, replace all required parts; SoundFX Direct Fit |
| 2003 | Toyota | Tacoma | 2.7L | L4 | N/A | If welded assembly, replace all required parts; SoundFX Direct Fit |
| 2002 | Toyota | Tacoma | 2.7L | L4 | N/A | If welded assembly, replace all required parts; SoundFX Direct Fit |
| 2001 | Toyota | Tacoma | 2.7L | L4 | N/A | If welded assembly, replace all required parts; SoundFX Direct Fit |
| 2000 | Toyota | Tacoma | 2.7L | L4 | N/A | with Federal Emission System; If welded assembly, replace all required parts; SoundFX Direct Fit |
| 2000 | Toyota | Tacoma | 2.7L | L4 | N/A | with California Emission System; If welded assembly, replace all required parts; SoundFX Direct Fit |
| 1999 | Toyota | Tacoma | 2.7L | L4 | N/A | If welded assembly, replace all required parts; SoundFX Direct Fit |
| 1998 | Toyota | Tacoma | 2.7L | L4 | N/A | If welded assembly, replace all required parts; SoundFX Direct Fit |
| 1997 | Toyota | Tacoma | 2.7L | L4 | N/A | If welded assembly, replace all required parts; SoundFX Direct Fit |
| 1996 | Toyota | Tacoma | 2.7L | L4 | N/A | If welded assembly, replace all required parts; SoundFX Direct Fit |
| 1995 | Toyota | Tacoma | 2.7L | L4 | N/A | with Federal Emission System; If welded assembly, replace all required parts; SoundFX Direct Fit |
| No rows match your filter. | ||||||