/live/media/WK/WK_84615_Ang.jpg)
Will it fit your vehicle?
Confirm before you buy. Free return shipping if it doesn't fit.
Walker 84615 Catalytic Converter - Left
| Brand | Walker 84615 |
|---|---|
| Position | Left |
| Universal Or Specific Fit | Universal |
| Grade Type | Premium |
| Tube Material | Steel |
| Body Shape | Round |
| Inlet Type | Pipe connection |
| Outlet Type | Pipe connection |
| Inlet Inside Diameter | 2.250 |
| Body Height | 4.000 |
| Body Length | 6.250 |
| Body Width | 4.000 |
| Heat Shield Attached | No |
| Inlet Quantity | 1 |
| Body Material | Stainless steel |
| Outlet Inside Diameter | 2.250 |
| Outlet Quantity | 1 |
| California Air Resources Board (CARB) Certified | Yes |
| Substrate Material | Ceramic |
| Converter Quantity | 1 |
| Inlet Mounting Hole Quantity | 1 |
| Outlet Mounting Hole Quantity | 1 |
| Overall Length | 12.030 |
| New York Certified | Yes |
| Shape | Round |
| Product line | CalCat |
| Fits | Cadillac · 8 vehicles |
CARB certified. Validated to meet California emissions standards for approved applications.
Universal fit. Pipe-connection design supports a wide range of exhaust configurations.
Stainless steel body. Round construction with a ceramic substrate for exhaust aftertreatment.
Cross-references 5461205 for the same application. See all 1.
Will it fit your vehicle?
Free return shipping if it doesn't fit.
Universal CARB-Certified Converter
Walker CalCat 84615 is a premium universal catalytic converter built for emissions compliance and validated to meet CARB standards. It uses a stainless steel body with a ceramic substrate and pipe connections for a straightforward exhaust-system installation.
Key Features
- Universal catalytic converter with premium-grade construction
- CARB certified for California emissions requirements
- Stainless steel body with steel tubing for corrosion resistance
- Ceramic substrate for exhaust aftertreatment performance
- Round body design with 2.250-inch inlet and outlet connections
Detailed Description
Walker CalCat 84615 is part of the CalCat product line, which focuses on universal catalytic converters validated for emissions compliance. This unit is designed, tested, and validated to meet CARB standards, and it is listed for OBDII vehicles from 1996 and newer as well as non-OBD vehicles from 1995 and older. The round stainless steel body, ceramic substrate, and pipe-connection inlet and outlet support a clean exhaust repair path for applications that require a universal catalytic converter. This part cross-references Monroe Shocks & Struts (e.g., 5461205) for the same application.
What It Is Used For
- Replacing a failed or restricted catalytic converter
- Restoring emissions-system function after converter damage
- Addressing exhaust flow issues caused by internal substrate breakdown
- Meeting CARB emissions requirements where applicable
Installation Notes and Tips
Verify inlet and outlet sizing, overall length, and available exhaust space before installation. Because this is a universal converter, fitment depends on the vehicle's exhaust configuration and the installer must confirm proper pipe connection alignment. For vehicle-specific applications, this part fits 2010-2011 Cadillac CTS, left, CalCat, and fits 2006-2011 Cadillac STS, left, CalCat.
Quality Assurance
Walker CalCat converters are designed, tested, and validated for CARB compliance. Part number 84615 is also identified by cross-reference 5461205.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 2011 | Cadillac | CTS | 3.6L | V6 | Left | CalCat |
| 2011 | Cadillac | STS | 3.6L | V6 | Left | CalCat |
| 2010 | Cadillac | CTS | 3.6L | V6 | Left | CalCat |
| 2010 | Cadillac | STS | 3.6L | V6 | Left | CalCat |
| 2009 | Cadillac | STS | 3.6L | V6 | Left | CalCat |
| 2008 | Cadillac | STS | 3.6L | V6 | Left | CalCat |
| 2007 | Cadillac | STS | 3.6L | V6 | Left | CalCat |
| 2006 | Cadillac | STS | 3.6L | V6 | Left | CalCat |
| No rows match your filter. | ||||||