Wix 51214 Engine Oil Filter

WIX 51214 Engine Oil Filter Overview

The WIX 51214 is a spin-on engine oil filter built for dependable oil filtration in light-duty applications. It uses enhanced cellulose media, a corrosion-resistant canister, and a silicone anti-drainback valve to support clean oil flow and reduce dry starts.

Compatible with 2000-2005 Jaguar S-Type applications that follow manufacturer OE recommended oil change intervals, this filter is a practical choice for routine maintenance on the Jaguar S-Type. The WIX 51214 also cross-references NAPA Gold 1214 for the same application.

Key Features

• Spin-on lube filter design with 3/4-16 thread size
• Enhanced cellulose media for engine oil filtration
• Anti-drainback valve helps retain oil in the filter after shutdown
• Bypass relief valve setting: 8-11 psi
• Flow rate: 7-9 GPM
• Burst pressure rating: 345 psi
• Micron rating: 21.00
• Height: 4.828 in. with 2.923 in. top outer diameter

Detailed Description

WIX 51214 is engineered for conventional, synthetic, and synthetic-blended motor oils when used according to the OE vehicle manufacturer’s service guidance. Its high-capacity media is built to trap contaminants while maintaining oil flow under normal and severe driving conditions, including stop-and-go traffic, short trips, dirt roads, and highway use. The closed top, enhanced cellulose media, and flexible silicone anti-drainback valve support consistent lubrication during start-up and extended service intervals.

This filter is a direct maintenance part for the Jaguar S-Type in model years 2000 through 2005, and it is also listed as a replacement for ACDelco PF1788, CARQUEST Premium Filters 85214, Luber-Finer PH7024, and Wix 51214. If you are searching for a WIX 51214 oil filter for Jaguar S-Type maintenance, this part matches the specified application data.

What It Helps Address

• Oil contamination from normal engine wear
• Reduced oil flow during cold starts
• Dry-start conditions after the vehicle sits
• Maintenance needs tied to OE oil change intervals
• Filtration demands in stop-and-go or severe driving

Installation Notes and Tips

Verify the thread size, gasket sealing surface, and filter clearance before installation. Replace the filter at the manufacturer-recommended oil change interval, and pre-fill only if the engine service procedure allows it. For Jaguar S-Type applications, confirm the vehicle year and service specification before ordering the WIX 51214.

Quality Assurance

WIX positions this filter for OEM-style service intervals and publishes laboratory performance data for dirt-holding capacity and filtration efficiency. The filter construction includes high-strength, corrosion-resistant components and sealing materials intended to maintain leak-resistant performance under varied operating conditions.