/live/media/WF/WF_51320_Fro.jpg)
Wix 51320 Engine Oil Filter
| Brand | Wix 51320 |
|---|---|
| Anti-Drain Back Valve | No |
| Bypass Relief Valve Setting | None |
| Class | W |
| Duty Type | LD |
| Flow Rate | 1-3 GPM |
| Height | 3.790 |
| Inner Diameter Top | Closed |
| Media Material | Enhanced Cellulose |
| Micron | 10.00 |
| Outer Diameter Top | 3.660 |
| Style | Spin-On Lube Filter |
| Thread Size | 5/8-18 |
| Fits | Fiat and Renault |
Spin-on lube filter. Simple replacement style for routine oil service.
Enhanced cellulose media. Captures fine contaminants with efficient engine protection.
10-micron filtration. Helps trap small particles before they circulate.
Cross-references ACDelco FF6, American Parts 92320 and Apollo PH226 for the same application. See all 67.
WIX 51320 Engine Oil Filter
The WIX 51320 engine oil filter is built for dependable oil filtration in normal and severe driving conditions. It is a spin-on lube filter with enhanced cellulose media, a 10-micron rating, and a 1-3 GPM flow rate for engines that need consistent oil cleanliness during daily driving, stop-and-go traffic, short trips, and highway use.
Key Features
- Spin-on lube filter design for straightforward oil service
- Enhanced cellulose media for efficient contaminant capture
- 10-micron filtration rating for fine particle control
- 1-3 GPM flow rate to support steady oil circulation
- Thread size: 5/8-18
- Closed inner diameter top
- No anti-drain back valve
- No bypass relief valve setting
Filtration Performance
WIX 51320 is engineered to trap dirt and contaminants while supporting OEM-recommended oil change intervals, typically 3,750 to 10,000 miles and not more than 12 months. It is suited for vehicles that see frequent starts, mixed driving, and demanding road conditions. This part cross-references FRAM P17 and NAPA Gold Filters 1320 for the same application. For buyers searching for a WIX oil filter for classic passenger cars, light-duty trucks, or a WIX 51320 replacement oil filter, this part number is a direct match for the listed application set.
What It Helps Address
- Excess dirt and debris circulating through engine oil
- Reduced filtration performance during routine oil changes
- Oil contamination from short-trip and stop-and-go driving
- Wear concerns from inconsistent oil cleanliness
- Service intervals that require a dependable spin-on filter
Installation Notes
Verify thread size, filter height, and sealing surface before installation. Replace the filter during each oil service and pre-fill only if the vehicle service procedure allows it. Because this filter does not use an anti-drain back valve, follow the vehicle manufacturer’s oil change procedure carefully, especially on engines where dry starts are a concern. Search terms such as WIX 51320 oil filter, engine oil filter for light-duty vehicles, and spin-on lube filter replacement are commonly used by shoppers comparing service parts.
Quality Assurance
WIX positions this filter for conventional, synthetic, and synthetic-blended motor oils and for both normal and severe duty use. Laboratory performance references include ISO 4548 testing data, supporting the filter’s role in engine protection and contaminant control. Fits select applications across General Motors, Ford, and Chrysler-related interchange listings, including vehicles commonly searched by make/model owners looking for a WIX 51320 replacement.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||