/live/media/WF/WF_51328_Fro.jpg)
Wix 51328 Engine Oil Filter
| Brand | Wix 51328 |
|---|---|
| Class | W |
| Duty Type | LD |
| Height | 5.000 |
| Inner Diameter Bottom | 0.707 |
| Media Material | Cellulose |
| Micron | 19.00 |
| Outer Diameter Bottom | 2.903 |
| Outer Diameter Top | 2.903 |
| Style | Cartridge Lube Metal Canister |
| Fits | Toyota · 3 vehicles |
Cartridge oil filter. Provides engine protection with conventional, synthetic, or synthetic-blended motor oils.
Cellulose media. Helps capture contaminants with 19-micron filtration.
Metal canister style. Built for cartridge lube applications.
Cross-references ACDelco PF819, ACDelco PF1709 and American Parts 92328 for the same application. See all 67.
WIX 51328 Engine Oil Filter Overview
The WIX 51328 is a cartridge engine oil filter built for light-duty service with conventional, synthetic, and synthetic-blended motor oils. It is specified for normal and severe driving conditions, including stop-and-go traffic, dirt roads, construction sites, short trips, and interstate travel.
Compatible With 1967-1969 Toyota Corona oil filter applications, this cartridge-style filter supports OEM-recommended service intervals for the Toyota Corona and similar OE-matched applications. The WIX 51328 is a direct-fit service part for routine oil changes where consistent filtration and engine protection matter.
Key Features
- Part number: 51328
- Cartridge oil filter for light-duty engine applications
- Cellulose filter media with 19 micron rating
- 5.000 in. height for OE-style fitment
- Outer diameter: 2.903 in.; inner diameter bottom: 0.707 in.
- Works with conventional, synthetic, and synthetic-blended motor oils
- Built for normal and severe driving conditions
Detailed Description
WIX 51328 uses cellulose media to capture contaminants during routine lubrication service while maintaining the flow characteristics expected in OE oil filter applications. Its cartridge lube metal canister style and measured dimensions make it a practical replacement for vehicles that call for this filter format. For drivers servicing a Toyota Corona, this filter supports the factory-style maintenance schedule and is suitable for oil change intervals typically ranging from 3,750 to 10,000 miles, not to exceed 12 months.
This part cross-references FRAM CH222 and Purolator PL133 for the same application. The WIX 51328 also appears in interchange listings for Toyota 415221010 and 0415240020, which helps when matching an existing service part number during maintenance.
What It Helps Address
- Engine oil contamination from normal wear particles
- Reduced filtration performance during extended service intervals
- Routine maintenance needs for Toyota Corona oil changes
- Filtration demands from stop-and-go driving and short-trip use
- Service requirements in dusty or severe driving environments
Installation Notes and Tips
Verify the filter style, dimensions, and OE service specification before installation. Replace the oil filter during each oil change and follow the vehicle manufacturer’s recommended interval for the application. Confirm that the sealing surfaces are clean and that the correct oil type is used for the engine service.
Quality Assurance
WIX positions this filter for OEM oil and filter change intervals and for use with the oil types specified by the vehicle manufacturer. The 19 micron cellulose media and OE-style cartridge construction reflect a service part built for standard maintenance requirements.
| Year | Make | Model | Liters | Cylinders | Position | Notes |
|---|---|---|---|---|---|---|
| 1969 | Toyota | Corona | 1.9L | L4 | N/A | Manufacturer OE Recommended Oil Change Intervals |
| 1968 | Toyota | Corona | 1.9L | L4 | N/A | Manufacturer OE Recommended Oil Change Intervals |
| 1967 | Toyota | Corona | 1.9L | L4 | N/A | Manufacturer OE Recommended Oil Change Intervals |
| No rows match your filter. | ||||||