/live/media/WF/WF_51368_Fro.jpg)
Wix 51368 Engine Oil Filter
| Brand | Wix 51368 |
|---|---|
| Anti-Drain Back Valve | Yes |
| Burst Pressure | 370 |
| Bypass Relief Valve Setting | 7-9 |
| Class | W |
| Duty Type | LD |
| Flow Rate | 28-30 GPM |
| Height | 3.380 |
| Inner Diameter Top | Closed |
| Media Material | Cellulose |
| Micron | 17.00 |
| Outer Diameter Top | 4.115 |
| Style | Spin-On Lube Filter |
| Thread Size | 24X1.5 MM |
| Fits | Toyota · 4 vehicles |
Spin-on lube filter. Simple replacement style for routine oil service.
Cellulose media. Captures contaminants while maintaining strong flow.
Anti-drainback valve. Helps prevent dry starts after shutdown.
Cross-references ACDelco PF2107, ACDelco X 4249 E and ACDelco X 4254 E for the same application. See all 165.
WIX 51368 Oil Filter Overview
The WIX 51368 engine oil filter is built for dependable engine protection in everyday driving and severe service conditions. It is a spin-on lube filter with cellulose media, a 17-micron rating, and an anti-drain back valve for cleaner starts after shutdown.
Compatible with 1985 Toyota Corolla and 1985-1986 Toyota Camry, this filter is a practical choice for Toyota oil filter replacement service when following OE-recommended oil change intervals.
Key Features
- Spin-on lube filter design for routine engine oil service
- Cellulose filter media with 17.00 micron filtration
- Anti-drain back valve helps reduce dry starts
- Bypass relief valve setting: 7-9
- Burst pressure: 370
- Flow rate: 28-30 GPM
- Thread size: 24x1.5 mm
- Height: 3.380 in; outer diameter: 4.115 in
Detailed Description
WIX part number 51368 is engineered for conventional, synthetic, and synthetic-blended motor oils. It is suited for normal commuting as well as stop-and-go traffic, short trips, dirt roads, construction zones, and interstate driving. The filter is designed to trap contaminants efficiently while maintaining capacity for extended service intervals recommended by the vehicle manufacturer. This part cross-references Toyota OE-style applications such as 90915-03003 and 04152-03003 for the same application.
For Toyota Corolla and Toyota Camry oil filter replacement, the WIX 51368 offers a direct-service solution with the dimensions and thread specification needed for the listed applications. The flexible silicone anti-drain back valve, where applicable, helps keep oil in the filter after shutdown to reduce dry starts at startup.
What It Helps Address
- Engine wear caused by contaminated motor oil
- Dry starts after the vehicle sits
- Reduced filtration performance in stop-and-go driving
- Oil service intervals that call for a dependable spin-on filter
- Routine maintenance on 1985 Toyota Corolla and 1985-1986 Toyota Camry
Installation Notes and Tips
Verify the thread size, gasket sealing surface, and overall filter dimensions before installation. Replace the filter during scheduled oil service and follow the OE vehicle manufacturer’s oil change interval guidance. Pre-fill only if the vehicle service procedure allows it, and always check for leaks after startup.
Quality Assurance
WIX filters are built for OE-recommended maintenance intervals and are tested for filtration performance, dirt-holding capacity, and pressure resistance. The 51368 is specified with a 370 burst pressure rating and laboratory-tested filtration performance data from WIX.
| Year | Make | Model | Liters | Cylinders | Fuel Type | Position | Notes |
|---|---|---|---|---|---|---|---|
| 1986 | Toyota | Camry | 2.0L | L4 | — | N/A | Manufacturer OE Recommended Oil Change Intervals |
| 1986 | Toyota | Camry | 1.8L | L4 | — | N/A | Manufacturer OE Recommended Oil Change Intervals |
| 1985 | Toyota | Camry | 1.8L | L4 | — | N/A | Manufacturer OE Recommended Oil Change Intervals |
| 1985 | Toyota | Corolla | 1.8L | L4 | DIESEL | N/A | Manufacturer OE Recommended Oil Change Intervals |
| No rows match your filter. | |||||||