/live/media/WF/WF_51970_Fro.jpg)
Wix 51970 Engine Oil Filter - Full Flow
| Brand | Wix 51970 |
|---|---|
| Position | Full Flow |
| Anti-Drain Back Valve | No |
| BetaRatio | 2/20=34/54 |
| Burst Pressure | 340 |
| Bypass Relief Valve Setting | None |
| Class | Ha |
| Duty Type | Hd |
| Flow Rate | 28-30 gpm |
| Height | 9.794 |
| Inner Diameter Top | Closed |
| Media Material | Enhanced cellulose |
| Micron | 20.00 |
| Outer Diameter Top | 4.661 |
| Style | Spin-on lube filter |
| Thread Size | 1 1/2-12 |
| Fits | — |
Heavy-duty filtration. High-capacity media helps protect engines in demanding service.
Spin-on design. Simple filter changes with a straightforward replacement style.
Enhanced cellulose media. Delivers efficient 20-micron filtration for cleaner oil flow.
Cross-references ABAC 631301360, ACDelco PF670 and ACDelco PF893 for the same application. See all 232.
WIX 51970 HD Oil Filter Overview
The WIX 51970 is a heavy-duty spin-on engine oil filter built for demanding service in trucks, farm equipment, construction machinery, mining equipment, and other high-load applications. It uses enhanced cellulose media and a high-capacity design to support strong oil filtration under extended service intervals.
Compatible With a wide range of diesel and industrial equipment applications, including Cummins, Caterpillar, Ford, Volvo, and International Harvester platforms where the listed cross-reference numbers are specified.
Key Features
- Heavy-duty oil filter for engine lubrication systems
- Enhanced cellulose media for 20-micron filtration
- Spin-on lube filter design with 1 1/2-12 thread size
- High flow rate of 28-30 GPM for demanding oiling systems
- Corrosion-resistant can, center tube, and end caps
- Leak-resistant sealing components for long service life
- Burst pressure rated at 340
- No anti-drain back valve and no bypass relief valve setting
Detailed Description
The WIX 51970 engine oil filter is engineered for HD service where consistent oil cleanliness matters. Its enhanced cellulose media and 20.00 micron rating help capture wear particles while maintaining the flow needed by medium and heavy-duty engines. With a 9.794-inch height, closed top inner diameter, and 4.661-inch outer diameter top, this spin-on filter is built for applications that call for a large-capacity lube filter with durable construction.
This part cross-references Fleetguard LF670 and Donaldson P550670 for the same application. It is commonly searched as a WIX 51970 oil filter for Cummins, Caterpillar, Ford, Volvo, and International Harvester equipment, especially when replacing an OEM-style heavy-duty engine oil filter.
What It Helps Address
- Excess engine wear from contaminated oil
- Reduced oil flow in high-demand diesel and industrial engines
- Premature filter restriction during extended service intervals
- Leak concerns caused by worn sealing components
- Filter housing corrosion in harsh operating environments
Installation Notes and Tips
Verify the thread size, filter height, and sealing surface before installation. Pre-fill only if the engine manufacturer allows it, and always lubricate the gasket before tightening. After startup, check for leaks and confirm proper oil pressure. For fitment-based searches, this WIX 51970 oil filter is commonly referenced for heavy-duty engine oil filter service on Cummins and Caterpillar equipment, as well as Ford and Volvo industrial applications listed in interchange data.
Quality Assurance
WIX HD oil filters are built with high-strength, corrosion-resistant components and sealing materials intended for long-lasting performance in severe-duty operating conditions. The 51970 is recommended for OEM oil and filter change intervals where this part number is specified.
| Year | Make | Model | Position | Notes |
|---|---|---|---|---|
| No rows match your filter. | ||||