Wix WL10000 Engine Oil Filter - Main

WIX WL10000 Engine Oil Filter

The WIX WL10000 is a spin-on engine oil filter built for dependable oil filtration in normal and severe driving conditions. It uses enhanced cellulose media, an anti-drain back valve, and a 21-micron rating to help keep oil cleaner during everyday driving, stop-and-go traffic, short trips, and highway use.

Key Features

• Spin-on lube filter design with 20x1.5 mm thread size
• Enhanced cellulose media for efficient contaminant capture
• Anti-drain back valve helps reduce dry starts after shutdown
• 8 psi bypass relief valve setting
• Flow rate of 8-10 GPM
• 2.576 in. height and 2.685 in. outer diameter
• Compatible with conventional, synthetic, and synthetic-blended motor oils
• Cross-reference example: Honda 15410-MFJ-D02

Detailed Description

Built for OE-style service intervals, the WIX WL10000 is intended for routine oil changes on vehicles such as Honda Civic and Honda Accord applications that use the specified filter size and thread pattern. The filter media is rated at 21 microns and is engineered to trap dirt and contaminants while maintaining oil flow under daily driving conditions. The flexible silicone anti-drain back valve adds protection against oil draining out of the filter after shutdown, which is especially useful when the engine sits between starts.

WIX WL10000 is also referenced by part number WL10000 and is cross-referenced in the aftermarket with select Honda oil filter numbers. For shoppers comparing Honda Civic oil filter or Honda Accord oil filter options, this part number should be matched carefully to the vehicle’s OE specification before purchase.

What It Helps Address

• Dirty engine oil from normal wear and combustion byproducts
• Oil drain-back after shutdown that can contribute to dry starts
• Reduced filtration performance during stop-and-go driving
• Contaminant buildup from short-trip and severe-duty use
• Routine maintenance needs for Honda Civic and Honda Accord oil service

Installation Notes and Tips

Verify thread size, gasket sealing surface, and overall dimensions before installation. Replace the filter during each oil service and pre-fill only if the vehicle manufacturer allows it. Tighten according to the filter and vehicle service instructions, and confirm there are no leaks after startup. Use the correct oil grade recommended by the OE vehicle manufacturer.

Quality Assurance

WIX designs this filter for OE-recommended oil and filter change intervals, typically 3,750 to 10,000 miles and not more than 12 months, depending on vehicle service requirements. Laboratory testing data cited by WIX includes high dirt-holding capacity and strong filtration efficiency at fine particle sizes.