Wix WL10290 Engine Oil Filter - Engine or Main

Overview of Wix WL10290 Engine Oil Filter

The Wix WL10290 engine oil filter is designed for reliable oil filtration in a range of vehicles including Buick, Cadillac, Chevrolet, Ford, GMC, and Lincoln models. This spin-on lube filter features enhanced cellulose media and an anti-drain back valve to maintain oil flow and engine protection during operation.

• Anti-Drain Back Valve to prevent dry starts
• Enhanced cellulose media for effective filtration
• Beta Ratio of 2/20=6/20 for particle retention
• Burst pressure rating of 350 psi
• Bypass relief valve set at 22 psi
• Spin-on style with 22x1.5 mm thread size
• Height of 3.45 inches and outer diameter of 2.921 inches

Technical Specifications and Features

The WL10290 oil filter utilizes enhanced cellulose media, providing efficient filtration with a micron rating of 21.00 to capture contaminants that can affect engine performance. The anti-drain back valve ensures oil remains in the filter during engine shutdown, reducing wear during startup. With a burst pressure of 350 psi and a bypass relief valve set at 22 psi, this filter maintains oil flow even under high-pressure conditions. The spin-on design with a 22x1.5 mm thread size allows for straightforward installation and secure fitment.

Compatible Vehicles and Applications

This Wix WL10290 oil filter is compatible with a variety of vehicles, including Buick LaCrosse, Regal, and Envision; Cadillac ATS, CT5, CT6, CTS, Escalade, and Escalade ESV; Chevrolet Camaro, Cruze, Equinox, Malibu, Spark, and Volt; Ford Bronco, Escape, Explorer, Mustang, Ranger, and Transit; GMC Acadia, Canyon, Colorado, Terrain, and Yukon; as well as Lincoln Aviator, Corsair, Nautilus, and Navigator models. It is designed for use in light-duty engines requiring a reliable spin-on oil filter.

Common Issues Addressed by Wix WL10290

• Prevents engine wear caused by contaminated oil
• Reduces risk of oil starvation during cold starts with anti-drain back valve
• Maintains oil pressure with bypass relief valve under high flow conditions
• Protects engine components by filtering particles down to 21 microns
• Ensures consistent oil flow and filtration in light-duty applications

Installation Notes and Tips

Before installing the Wix WL10290, ensure the engine is cool and the old filter is properly removed. Apply a light coat of clean engine oil to the new filter’s gasket to ensure a proper seal. Thread the filter by hand to avoid cross-threading and tighten according to vehicle manufacturer specifications. Check for leaks after installation and during initial engine operation.

Quality Assurance and Warranty

Wix filters are manufactured to meet industry standards for filtration and durability. The WL10290 is built with quality materials including enhanced cellulose media and a robust anti-drain back valve. While specific warranty details may vary, Wix typically offers coverage against defects in materials and workmanship. Refer to Wix’s official documentation for complete warranty information.